Advalab Forced Air Drying Oven ADFAO-523 delivers drying from 50 to 250 degrees Celsius, giving laboratories a laboratory heating and drying oven with 325 liter volume. This laboratory drying oven combines PID temperature control with LED controller, automatic power off when the timer ends, low-noise centrifugal air blower with optimized air duct, IR Ni-Cr alloy heater, and microcomputer-calculated heater output power. Over-temperature protection controller that stops heating, over-temperature alarm, emergency stop switch, buzzer and flashing alarm, phase loss protection, over-current and overload protection, and fuse and grounding protection safeguard this hot air drying oven. Double-layer high-temperature silicone rubber door seal, explosion-proof door handle structure, and high-density ceramic fiber insulation complete this convection drying oven as an industrial drying oven.
| Volume | 325 L |
|---|---|
| Interior dimensions (W × D × H) | 500 × 500 × 1300 mm |
| Exterior dimensions (W × D × H) | 850 × 785 × 1550 mm |
| Temperature range | 50 to 250 °C |
| Temperature resolution | 0.1 °C |
| Temperature fluctuation | ±1.0 °C |
| Temperature uniformity | ±5 °C at 150 °C |
| Timer | 0 to 999 min |
| Time resolution | 0.1 minute |
| Temperature sensor | PT100 platinum resistance thermometer |
| Shelves | 14 |
| Atmosphere | Forced air convection |
| Exhaust port | Adjustable exhaust on the oven top with external extraction connection for fumes |
| Power supply | 220 VAC, 50 Hz, single phase, or 380 VAC, 50 Hz, three phase |
| Programmable controller | Optional (USB history data download, RS232 or RS485 remote control, wireless remote control) |
| Nitrogen purging | Optional |
| Packing dimension | 960*910*2150mm |
| Net Weight | 210 kg |
| Gross Weight | 270kg |
Primary Functions:
– Forced air drying
– Heating and drying of samples
– Convection drying at controlled temperature
Application:
– Laboratories
– Industrial facilities
– Research laboratories