Automated Cell Washer ADCWC-502 operates at an adjustable speed of 4500 rpm with dual operating modes, enabling efficient red blood cell (RBC) washing for 12 × 2 mL tubes (12 mm × 75 mm). It provides a maximum RCF of 2000 × g, programmable selection of 1, 2, or 3 wash cycles, and manual centrifugation times of up to 999 seconds to accommodate different laboratory protocols. The unit features a brushless motor, polypropylene rotor, stainless steel chamber, and a check function for procedure verification, supporting smooth laboratory operation.
| Maximum Speed | 4500 rpm (adjustable) |
|---|---|
| Maximum RCF | 2000 × g (adjustable) |
| Maximum Capacity | 12 × 2 mL tubes (12 mm × 75 mm) |
| Operating Mode | Automatic (180 seconds) / Manual |
| Cycle Selection | 1, 2, or 3 wash cycles (Automatic mode) |
| Time Selection | Up to 999 seconds (Manual mode) |
| Control Mode | Automatic / Manual |
| Command Functions | Start, Stop, Check, Manual, Agitate, Alarm On/Off, Low Saline |
| Check Function | Stops at the end of each step-in cycle for procedure verification |
| Drive | Brushless motor |
| Rotor / Chamber Material | Polypropylene rotor / Stainless steel chamber |
| Dimensions (W × D × H) | 430 × 320 × 220 mm |
| Net Weight | 18kgs |
| Gross Weight | 28kgs |
Our Automated Cell Washer ADCWC-502 is used in clinical laboratories, blood banks, transfusion laboratories, and research institutions for automated red blood cell washing procedures.
