Spectral Colorimeter ADSCM-504 with a measurement time of approximately. It utilizes a balanced LED light source that ensures sufficient spectral distribution across the visible range. The device features a built-in silicon photodiode array sensor which enhances measurement speed. The unit can pass international and national calibration standards, ensuring the accuracy of its data. This device is well-suited for a wide range of applications, including quality control in plastics, paint, and textile industries.
| Geometry | D/8 |
|---|---|
| Repeatability | ΔE < 0.08 |
| Display Resolution | 0.1% |
| Measuring Aperture | 8 mm |
| Measurement Index | Reflectivity, Samples Chromaticity Values, Color Difference Values/Graph, PASS/FAIL Result, Color Simulation, Color Offset |
| Illuminants | D65, A, F2 (CWF) |
| Light Source | LED light source |
| Measurement & Observation Mode | SCI (Specular Component Included) and SCE (Specular Component Excluded) |
| Calibration | ETC real-time Calibration technique with a built-in standard white board into the optical system. |
| Software Support | SQCX quality management software |
| Accuracy | Inter-instrument Error: MAV/SCI, Within ΔE*ab 0.4 |
| Observer Angles | 10° |
| Standards | Pass international standards and national standards of calibration |
| Sensor | Silicon photodiode array |
| Wavelength Interval | 10 nm |
| Wavelength Range | 400 – 700 nm |
| Reflectance Range | 0 – 100% |
| Measurement Method | Single measurement, average measurement |
| Measurement Time | About 1.5 seconds |
| Interface | USB |
| Screen | Color LCD display |
| Battery Capacity | Rechargeable Li-ion battery |
| Light Source Lifetime | Up to 5 years |
| Storage | 100 standard samples, 20000 measurement data |
| Dimension | 81×71×214mm |
| Weight | 460 g |
The Spectral Colorimeter ADSCM-504 is suitable for accurate color measurement and quality control in industries such as plastic electronics, paint and ink, textile printing and dyeing, and ceramics.
