Spectral Colorimeter ADSCM-504
Spectral Colorimeter ADSCM-504 with a measurement time of approximately. It utilizes a balanced LED light source that ensures sufficient spectral distribution across the visible range. The device features a built-in silicon photodiode array sensor which enhances measurement speed. The unit can pass international and national calibration standards, ensuring the accuracy of its data. This device is well-suited for a wide range of applications, including quality control in plastics, paint, and textile industries.
| Geometry |
D/8 |
| Repeatability |
ΔE < 0.08 |
| Display Resolution |
0.1% |
| Measuring Aperture |
8 mm |
| Measurement Index |
Reflectivity, Samples Chromaticity Values, Color Difference Values/Graph, PASS/FAIL Result, Color Simulation, Color Offset |
| Illuminants |
D65, A, F2 (CWF) |
| Light Source |
LED light source |
| Measurement & Observation Mode |
SCI (Specular Component Included) and SCE (Specular Component Excluded) |
| Calibration |
ETC real-time Calibration technique with a built-in standard white board into the optical system. |
| Software Support |
SQCX quality management software |
| Accuracy |
Inter-instrument Error: MAV/SCI, Within ΔE*ab 0.4 |
| Observer Angles |
10° |
| Standards |
Pass international standards and national standards of calibration |
| Sensor |
Silicon photodiode array |
| Wavelength Interval |
10 nm |
| Wavelength Range |
400 – 700 nm |
| Reflectance Range |
0 – 100% |
| Measurement Method |
Single measurement, average measurement |
| Measurement Time |
About 1.5 seconds |
| Interface |
USB |
| Screen |
Color LCD display |
| Battery Capacity |
Rechargeable Li-ion battery |
| Light Source Lifetime |
Up to 5 years |
| Storage |
100 standard samples, 20000 measurement data |
| Dimension |
81×71×214mm |
| Weight |
460 g |
- Full-spectrum Illumination
- Dual-array Sensor
- Real-time Calibration
- Capacitive Touchscreen
- USB Connectivity
The Spectral Colorimeter ADSCM-504 is suitable for accurate color measurement and quality control in industries such as plastic electronics, paint and ink, textile printing and dyeing, and ceramics.
