| Volume | 5µl |
| Accuracy | ±8.00µl |
| Precision | ≤5.00µl |
Our Fixed Volume Pipette ADFPT-501 is widely used in pharmaceuticals, clinical diagnostics and food testing for precise liquid handling tasks such as sample preparation, reagent dispensing, and assay setup.
1. What is a Fixed Volume Pipette used for?
A Fixed Volume Pipette is designed for repetitive, accurate liquid dispensing of a specific, pre-set volume. It is commonly used in laboratories where consistent volume measurement is critical, such as in diagnostic testing or routine assays. The fixed volume helps reduce the chances of user error compared to adjustable pipettes. It's especially useful for tasks that require high repeatability.
2. What types of liquids can I use with a Fixed Volume Pipette?
Fixed Volume Pipette is generally suitable for aqueous and low-viscosity solutions. It is commonly used for buffer solutions, reagents, or standard lab chemicals. Avoid using corrosive, highly viscous, or volatile solvents unless the pipette is rated for them. Using incompatible liquids can damage internal components or affect accuracy.
3. Is Fixed Volume Pipette accurate and reliable?
Yes, Fixed Volume Pipette is known for their high accuracy and repeatability, especially for routine, repetitive tasks. Because the volume is fixed, there's less variability introduced by user handling. It is factory-calibrated to dispense a precise amount with minimal deviation. However, It should still be regularly calibrated and maintained. Proper use and care will ensure long-term reliability and precision.
4. Do Fixed Volume Pipette require special tips?
Most Fixed Volume Pipette is compatible with standard universal pipette tips. It’s important to use tips that seal properly to avoid leaks or inaccurate dispensing. Using low-retention tips can also improve precision, especially for small volumes or viscous samples.
5. How often should I calibrate a Fixed Volume Pipette?
Calibration should be done at least once every 6 to 12 months, depending on usage frequency and the lab’s quality standards. High-precision environments may require more frequent checks, especially in regulated industries like pharmaceuticals or diagnostics. Routine internal performance checks can also help detect early signs of deviation. If the pipette is dropped or used with incompatible chemicals, immediate recalibration may be needed.
| Volume | 20µl |
| Accuracy | ±3.00µl |
| Precision | ≤1.50µl |
| Volume | 100µl |
| Accuracy | ±2.00µl |
| Precision | ≤1.00µl |
| Volume | 25µl |
| Accuracy | ±3.00µl |
| Precision | ≤1.50µl |
| Volume | 10µl |
| Accuracy | ±4.80µl |
| Precision | ≤2.50µl |
| Volume Range: | 500 to 10000 µl |
| Increment: | 10.00 µl |
| Test Volume: | 10000 µl <br/> 5000 µl <br/> 1000 µl |
| Volume Range: | 10 to 300µl |
| Increment: | 0.20µl |
| Test Volume: | 30µl<br>150µl<br>300µl |
| Volume Range: | 50-1000µl |
| Increment: | 1.00µl |
| Test Volume: | 100µl<br/> 500µl<br/> 1000µl |
| Volume Range: | 5 to 120µl |
| Increment: | 0.10 µl |
| Test Volume: | 12 µl<br/> 60 µl<br/> 120 µl |
| Volume Range: | 100to5000µl |
| Increment: | 5.00µl |
| Test Volume: | 5000µl<br/> 2500µl<br/> 500µl |
| Volume Range: | 0.1 to 10 µl |
| Increment: | 0.01 µl |
| Test Volume: | 10 µl <br/> 5 µl <br/> 1 µl |
| Volume Range: | 75µl |
| Accuracy: | ±0.8% at 75µl |
| Precision : | ±0.3% at 75µl |
| Volume Range: | 10µl |
| Accuracy: | ±1.2% at 10µl |
| Precision: | ±0.8% at 10µl |
| Volume Range: | 200µl |
| Accuracy: | ±0.8% at 200µl |
| Precision: | ±0.3% at 200µl |
| Volume Range: | 5µl |
| Accuracy: | ±2.5% at 5µl |
| Precision : | ±1.5% at 5µl |
| Volume Range: | 50µl |
| Accuracy: | ±1% at 50µl |
| Precision: | ±0.4% at 50µl |
| Volume Range: | 300µl |
| Accuracy: | ±0.8% at 300µl |
| Precision: | ±0.3% at 300µl |
| Volume Range: | 20µl |
| Accuracy: | ±1.0% at 20µl |
| Precision: | ±0.5% at 20µl |
| Volume Range: | 100µl |
| Accuracy: | ±0.8% at 100µl |
| Precision: | ±0.3% at 100µl |
| Volume Range: | 30µl |
| Accuracy: | ±1.0% at 30µl |
| Precision : | ±0.4% at 30µl |
| Volume Range: | 10 to 100 µl |
| Increment: | 1 µl |
| Test Volume: | 100 µl<br/> 50 µl<br/> 10 µl |
| Volume Range: | 0.2 to 2 µl |
| Increment: | 0.002 µl |
| Test Volume: | 0.2 µl<br/> 0.5µl<br/> 2 µl |
| Volume Range: | 0.5 to 5 µl |
| Increment: | 20 µl |
| Test Volume: | 1000 µl<br/> 2500 µl<br/> 5000 µl |
| Volume Range: | 1 to 5 µl |
| Increment: | 0.05 µl |
| Test Volume: | 5 µl<br/> 2.5µl<br/> 1 µl |
| Volume Range: | 0.5 to 10 µl |
| Increment: | 0.02 µl |
| Test Volume: | 1 µl<br/> 5µl<br/> 10 µl |
| Volume Range: | 30to 300 µl |
| Increment: | 5 µl |
| Test Volume: | 300 µl<br/> 150 µl<br/> 30 µl |
| Volume Range: | 2 to 20 µl |
| Increment: | 0.02 µl |
| Test Volume: | 2 µl<br/> 10 µl<br/> 20 µl |
| Volume Range: | 10 to 100 µl |
| Increment: | 0.2 µl |
| Test Volume: | 10 µl<br/> 50 µl<br/> 100 µl |
| Volume Range: | 0.1 to 2.5 µl |
| Increment: | 0.05 µl |
| Test Volume: | 0.25 µl<br/> 1.25 µl<br/> 2.5 µl |
| Volume Range: | 1 to 10 µl |
| Increment: | 0.1 µl |
| Test Volume: | 10 µl<br/> 5µl<br/> 1 µl |
| Volume Range: | 100 to 1000 µl |
| Increment: | 2 µl |
| Test Volume: | 100µl<br/> 500µl<br/> 1000 µl |
| Volume Range: | 1 to 10 µl |
| Increment: | 20 µl |
| Test Volume: | 1 µl<br/> 5µl<br/> 10 µl |
| Volume Range: | 100 to 1000 µl |
| Increment: | 5 µl |
| Test Volume: | 1000 µl<br/> 500µl<br/> 100 µl |
| Volume Range: | 20 to 200 µl |
| Increment: | 0.2 µl |
| Test Volume: | 20 µl<br/> 100 µl<br/> 200 µl |
| Volume Range: | 0.5 to 10 µl |
| Increment: | 0.1 µl |
| Test Volume: | 1 µl<br/> 5µl<br/> 1 µl |
| Volume Range: | 5 to 50 µl |
| Increment: | 0.5 µl |
| Test Volume: | 50 µl<br/> 25 µl<br/> 5 µl |
| Volume Range: | 2to 20 µl |
| Increment: | 0.5 µl |
| Test Volume: | 20 µl<br/> 10 µl<br/> 2 µl |
| Volume Range: | 20 to 200 µl |
| Increment: | 1 µl |
| Test Volume: | 200µl<br/> 100µl<br/> 20 µl |
| Volume Range: | 30 to 300 µl |
| Increment: | 5 µl |
| Test Volume: | 300 µl<br/> 150 µl<br/> 30 µl |
| Volume Range: | 50 to 300 µl |
| Increment: | 5 µl |
| Test Volume: | 300 µl<br/> 150 µl<br/> 50 µl |
| Volume Range: | 0.5 to 10 µl |
| Increment: | 0.1 µl |
| Test Volume: | 10 µl<br/> 5 µl<br/> 1 µl |
| Volume Range: | 10 to 100 µl |
| Increment: | 1 µl |
| Test Volume: | 100 µl<br/> 50 µl<br/> 2 µl |
| Volume Range: | 2 to 20 µl |
| Increment: | 0.5 µl |
| Test Volume: | 20 µl<br/> 10 µl<br/> 2 µl |
| Volume Range: | 50 to 300 µl |
| Increment: | 5 µl |
| Test Volume: | 300 µl<br/> 150 µl<br/> 50µl |
| Volume Range: | 2 to 20 µl |
| Increment: | 0.5 µl |
| Test Volume: | 20 µl<br/> 10 µl<br/> 2 µl |
| Volume Range: | 5 to 50 µl |
| Increment: | 0.5 µl |
| Test Volume: | 50 µl<br/> 25 µl<br/> 5 µl |
| Volume Range: | 10 to 100 µl |
| Increment: | 1 µl |
| Test Volume: | 100 µl<br/> 50 µl<br/> 10 µl |
| Volume Range: | 5 to 50 µl |
| Increment: | 0.5 µl |
| Test Volume: | 50 µl<br/> 25 µl<br/> 5 µl |
| Volume Range: | 30 to 300 µl |
| Increment: | 5 µl |
| Test Volume: | 300 µl<br/> 150 µl<br/> 30µl |
| Volume Range: | 20 to 200 µl |
| Increment: | 1 µl |
| Test Volume: | 200 µl<br/> 100 µl<br/> 10µl |
| Volume Range: | 0.5 to 10 µl |
| Increment: | 0.1 µl |
| Test Volume: | 10 µl<br/> 5 µl<br/> 1 µl |
| Volume Range: | 20 to 200 µl |
| Increment: | 1 µl |
| Test Volume: | 200 µl<br/> 100 µl<br/> 20 µl |
| Volume Range: | 2 to 20µl |
| Increment: | 0.5µl |
| Test Volume: | 20µl <br/> 10µl <br/> 2µl |
| Volume Range: | 20 to 200µl |
| Increment: | 1µl |
| Test Volume: | 200µl <br/> 100µl <br/> 20µl |
| Volume Range: | 10 to 100µl |
| Increment: | 1µl |
| Test Volume: | 100µl <br/> 50µl <br/> 10µl |
| Volume Range: | 10 to 1000µl |
| Increment: | 5µl |
| Test Volume: | 1000µl <br/> 500µl <br/> 100µl |
| Volume Range: | 1 to 5µl |
| Increment: | 50µl |
| Test Volume: | 5000µl <br/> 2500µl <br/> 1000µl |
| Volume Range: | 0.5 to 10µl |
| Increment: | 0.1µl |
| Test Volume: | 10µl <br/> 5µl <br/> 1µl |
| Volume Range: | 5 to 50µl |
| Increment: | 0.5µl |
| Test Volume: | 50µl <br/> 25µl <br/> 5µl |